Signode Strapping Tools

Steel Strapping Tools

RCD-3431 Steel Manual Sealer 3/4" Reverse Double Notch

• Manufacturer No: RCD-3431
• Type: Reverse Double Notch
• Strap Width: 3/4"
• Strap Thickness: .023"-.031"
• Mech. Adv.: Side Action
• Seal Used: Open or Pusher
• Weight: 7.2 lbs.
• Application: Flat or Rounded Surfaces
• Box Dimensions: 7"W x 31"L x 3"H
• Parts List
• Warranty

The Signode RCD-3431 (RCD3431) is used with 3/4" high tensile steel strapping. It seals using a double notch, up-cut (reverse notch) seal joint. The RCD-3431 is a little heavier duty than some sealers, weighing 7 pounds, steel construction.

Side Action Sealers

• Operated by pushing top handle down while lower handle rests against flat surface of item being strapped. For heavy tensile strength, 0.025" to 0.035"-thick strapping.
• Steel Strapping Sealers
• Create a strong, secure seal by notching seals into tensioned strapping. Outer edges of strapping and seals are notched by turning tabs down (Regular) or up (Reverse). Designed for either flat or round surfaces. Steel construction.